Water filter
117
Once the IntensiveClear 2.0 charcoal fil-
ter has been replaced, the water filter
display must be reset using Settings
mode on the display (see “Selecting
additional settings – Resetting the Water
Filter Display”).
After inserting a new water filter, dis-
pose of all ice cubes produced in the
next 24hours following the change.
Using an external water filter
If an external water filter is attached to
your household water supply, use an In-
tensiveClear 2.0 mesh filter in place of
an IntensiveClear 2.0 charcoal filter.
To Next Page