PWM 506/508 en-GB
= standard, = optional, + = only on request, - not available
11 276 310/11 11
Equipotential bonding (PA)
Machine connection (with installation kit)
XCI-Box / XCI-AD interface
Peak load/energy management (SLA)
Machine connection (with XCI-Box)
Communication module (XKM)
Communication module XKM 3200 WL PLT
Connection for liquid detergents
Max. no. of dispenser pumps
Installation on machine feet (F)
Machine foot, height-adjustable with thread
Floor anchor kit (for 2 machine feet) with anchors
Wood screws according to DIN 571
Rawl plugs (diameter x length)
Anchoring of Miele plinths
Accessory: Miele plinth (fasteners included)
Wood screws according to DIN 571
Rawl plugs (diameter x length)
Plinth floor anchoring (to be provided on site)
Machine installation on permanent plinth (concrete or masonry)
Plinth installation footprint (W/D)
Wood screws according to DIN 571
Rawl plugs (diameter x length)
Overall machine dimensions (H/W/D)
Casing dimensions (H/W/D)
Site-access dimensions (H/W)
Min. site-access (excl. packaging)
Recommended side gap – washer-dryer stack
Recommended distance to opposite wall from machine front
Machine weight (net weight)
Max. floor load in operation
Emission sound pressure level (in accordance with EN ISO 11203/11204)
Heat dissipation rate to installation site