Buzzer
When the buzzer function has been
activated, an audible tone sounds at
the end of a programme or when
Rinse hold is reached.
There are three different options:
Setting 1
= off
The Buzzer button is deactivated.
Setting 2
= normal
The buzzer sounds at the end of a
programme or when Rinse hold is
reached (default setting)
Setting 3
= loud
The buzzer sounds louder at the end of
a programme or when Rinse hold is
reached
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that
:
–
The washing machine is switched off.
–
The drum door is properly closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B - C.
B Press the I-On/0-Off button in.
C Wait until the indicator light for the
Start/Stop button comes on...
D . . . and then release the Start/Stop
button.
E Press the Buzzer button four times
.
–
The Buzzer indicator light will flash
five times.
–
A P will flash in the display
alternating with the number 1, 2 or 3.
F Each subsequent press of the Start/
Stop button will select a different
setting.
The number alternating with the P in the
display refers to the settings as follows:
1 = off
2 = normal (default setting)
3 = loud
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
61
To Next Page
Loading...
