Keypad tones
An audible tone sounds each time a
button is pressed.
The washing machine is delivered with
the keypad tone switched off.
Follow steps A to G to programme
and store in memory.
Before you begin, first ensure that
:
–
The washing machine is switched off.
–
The drum door is properly closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B - C.
B Press the I-On/0-Off button in.
C Wait until the indicator light for the
Start/Stop button comes on...
D . . . and then release the Start/Stop
button.
E Press the Buzzer button five times
.
–
The Buzzer indicator light will flash
six times.
A P will flash in the display alternating
with the number 0 or 1.
0 = keypad tone is deactivated.
1 = keypad tone is activated.
F Press the Start/Stop button to
change the display from 0 to 1
(activated) or from 1 to 0
(deactivated).
G Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory and will remain so
until you alter it.
Programmable functions
62
To Next Page
Loading...
