Installation of the ducting
*INSTALLATION*
64
Installing plug-in pipes
The tumble dryer is supplied with a
connector for installing a pipe. It can
be beneficial to use plug-in pipes if the
total duct length is long. A pipe gener-
ates less resistance against the ex-
haust air than a highly flexible exhaust
air hose, for example. This has a pos-
itive effect on the time and energy
needed for drying.
You will need
– The connector provided
– A wall pipe* or a window connection*
(*optional accessory)
– A plastic waste water pipe from a
specialist retailer. If the required pipe
diameter is over 100mm, additional
adapter pipes are needed for the pipe
system (e.g. from 100mm to
125mm).
Insert the connector (2) into the ex-
haust air outlet.
Install the pipe (1).
Example
a
Wall pipe (installation instructions
are provided with the Miele wall
pipe)
b
Connector
c
Plastic waste water pipe, diameter
DN100
To Next Page
Loading...
Need help?
General
