Supervisor level (programming mode)
27
Pro-
gramme
Designation Possible set
value
Standard
setting
Explanation
Cottons & Timed operation internal/ex-
ternal1
Drum drive pause
– See “Pauses” table
Cottons & Timed operation internal/ex-
ternal2
Heater bank temperature
– See “Heater bank temperature” table
Cottons & Timed operation internal/ex-
ternal2
Process air temperature
– See “Process air temperature” table
Cottons & Timed operation internal/ex-
ternal2
Drive running time in primary direction
– See table “Reversing cycle”
Cottons & Timed operation internal/ex-
ternal2
Drive running time in reverse direction
– See table “Reversing cycle”
Cottons & Timed operation internal/ex-
ternal2
Drive pause time
– See “Pauses” table
Synthetics/Delicates & Timed opera-
tion internal/external3
Heater bank temperature
– See “Heater bank temperature” table
Synthetics/Delicates & Timed opera-
tion internal/external3
Process air temperature
– See “Process air temperature” table
Synthetics/Delicates & Timed opera-
tion internal/external3
Drive running time in primary direction
–
TOP/COP:
See table “Reversing cycle”
Synthetics/Delicates & Timed opera-
tion internal/external3
Drive running time in reverse direction
–
TOP/COP:
See table “Reversing cycle”
Synthetics/Delicates & Timed opera-
tion internal/external3
Drive pause time
– See “Pauses” table
PRO & Timed operation internal/ex-
ternal4
Heater bank temperature
–
TOP/COP:
See “Heater bank temperature” table
PRO & Timed operation internal/ex-
ternal4
Process air temperature
–
TOP/COP:
See “Process air temperature” table
PRO & Timed operation internal/ex-
ternal4
Drive running time in primary direction
– See table “Reversing cycle”
PRO & Timed operation internal/ex-
ternal4
Drive running time in reverse direction
– See table “Reversing cycle”
PRO & Timed operation internal/ex-
ternal4
Drive pause time
– See “Pauses” table
Label
Heater bank temperature
– See “Heater bank temperature” table
Label
Process air temperature
– See “Process air temperature” table