Miele PFD 101 - Operation; Starting and Selecting Programmes

Operation
49
Switching on the dishwasher
 Make sure the spray arms can rotate
freely.
 Close the door.
 Open the stopcock, if it is closed.
 Touch the sensor control.
If the dishwasher has been switched
off for longer than 1minute, you will
need to hold the sensor control for
a bit longer (wipe protection).
The ECO programme will appear
briefly in the display and the
appropriate sensor control will be
illuminated.
Next, the estimated energy and water
consumption may be shown for the
chosen programme for several
seconds.
Then the display will show the
estimated duration for the selected
programme.
The Startsensor control flashes.
Selecting a programme
Choose your programme according to
the type of crockery and the degree of
soiling.
The different programmes and their
uses are described in the “Programme
chart” later on in this booklet.
 Touch the sensor control for the
programme you want.
The sensor control for the selected
programme will light up.
You can now select programme options
(see “Programme options”).
If any programme options are selected,
the appropriate sensor controls will also
light up.