Interrupting a program
A program will be interrupted as soon
as the door is opened.
When the door is closed again, the
program will continue from where it was
interrupted.
,
Water in the commercial
dishwasher is hot. Risk of scalding!
Only open the door if absolutely
necessary and be very careful.
Before closing the door again, leave
it slightly ajar for approx.
20 seconds. This will allow the
temperature in the wash cabinet to
settle. Close the door firmly until it
clicks shut.
Changing a program
If the detergent dispenser cover has
already opened, powder detergent
must be added for the new program
unless liquid detergent is being
dispensed automatically with a
dispensing module.
If a program has already started and
you wish to change it:
^
Press the Start/Stop button for at
least one second.
The program will be cancelled.
^ Select and start the desired program.
Operating the commercial dishwasher
41
To Next Page
Loading...
