Faults in the water intake or water drain
Problem Possible fault Solution
One of the following
fault messages are
displayed:
2 Open stopcock
The water tap is
closed.
Open the water tap all the way.
2 Inlet
Before fixing the fault:
–
Press the - button to turn
the commercial dishwasher
off.
There is a problem with
the water intake.
–
Open the water tap all the
way and restart the program.
– Clean the screen in the
water intake (see
Maintenance).
– The water pressure at the
water connection is less than
30 kPa (4.4 psi).
Consult a plumber.
Frequently asked questions
51
To Next Page
Loading...
