The cover must be opened to clean the
inside of the filter:
^ Push the clips together in the
direction of the arrows as shown a,
and open the coverb.
^ Clean all parts under running water.
^ Close the cover so that the lock
engages.
^
Replace the filter combination so that
it lies flat in the bottom of the wash
cabinet.
^ Lock the filter in place by turning the
handle forward until the arrows face
each other.
,
The filter combination must be
inserted correctly and locked.
Otherwise large dirt particles can
get into the circulation system and
clog it.
Cleaning and care
47
To Next Page
Loading...
