Electrical connection
65
Procedure:
Determine which type of power supply is available and how it is fused.
Look for the line in the table with the correct power supply (column U) and the right fusing
(column ).
Read the circled code number in the last column. The following drawing matches each code number to a
connection diagram.
Connect the mains connection cable to the terminals PE to N in accordance with the connection diagram.
Set the bridge(s) in accordance with the connection diagram.
INFO: The machines are supplied as per the connection diagram with code number 1.
The parameter P555 (locking) has to be set in accordance with the fusing.
To Next Page
Loading...
