To Next PageTo Next Page
Need help?Do you have a question about the Miele PG 8172 and is the answer not in the manual?
General| Width | 60 cm |
|---|---|
| Depth | 60 cm |
| Energy Efficiency Class | A++ |
| Delay start | Yes |
| Child lock | Yes |
| Auto door opening | Yes |
| Type | Commercial |
| Water Connection | Cold water |
| Electrical Connection | 230 V |
| Dimensions (H x W x D) | 835 mm x 600 mm x 600 mm |
Crucial safety precautions for operating the Miele PG 8172 commercial dishwasher.
Defines the intended commercial application of the dishwasher.
Lists prohibited uses and potential hazards.
Details essential requirements for safe electrical connection of the machine.
Outlines safety procedures for maintenance and repair work.
General advice for safe operation and accident prevention.
Overview of the machine's features and operational modes.
Explains how the machine heats up and indicates readiness for use.
Details specific optional or model-dependent equipment.
Explains the function and automatic metering of rinse aid.
Information on detergent types and manual dosing procedures.
Guidelines for using suction tubes with liquid containers.
Procedures and precautions for switching detergent types.
Instructions for refilling the salt container for the water softener.
Essential checks and preparations before machine startup.
Steps to start and prepare the dishwasher.
Detailed instructions for running a wash cycle.
Proper loading techniques for dishes, cutlery, and glasses.
How to utilize the automatic start function.
Procedure for selecting alternative wash programmes.
How to activate an intensified wash cycle for tougher stains.
Methods for stopping a running wash programme prematurely.
Correct procedure for powering down the dishwasher.
Daily cleaning tasks to maintain hygiene and performance.
Instructions for running the end-of-day self-cleaning cycle.
Guidance on cleaning the machine's internal and external surfaces.
Weekly maintenance for spray arms and bearings.
Monthly tasks including dirt trap and ECO module cleaning.
Importance and procedure for descaling the machine.
Recommends professional servicing and replacement parts.
Addresses malfunctions related to open hoods or empty containers.
Troubleshooting steps for water supply and descaling needs.
Solutions for blocked spray arms and filter cylinders.
Rectifying pump inlet filter issues and hood opening defects.
General troubleshooting for errors displayed as codes.
Guide to viewing specific error codes on the display.
Troubleshooting tips for inadequate cleaning performance.
Procedure to prime detergent and rinse aid dispenser pumps.
Overview and usage of special wash programmes.
Understanding the display of events and recorded malfunctions.
Adjusting date, time, and temperature units.
Procedures for setting date, time, contrast, and language.
Setting automatic start and stop times for the machine.
Reading out machine operating data like usage hours and cycles.
Accessing detailed logs of machine operations and events.
Instructions for running the descaling programme.
Step-by-step guide to initiating the descaling process.
Instructions for running the basic cleaning programme.
Step-by-step guide to initiating basic cleaning.
How to change the amount of detergent and rinse aid dispensed.
Procedure to reset the indicator for demineralisation units.
Instructions for horizontal installation and leveling the machine.
Procedures for assembling and securing tables to the machine.
How to adapt the basket support for different basket sizes.
Details on water quality, temperature, and hardness specifications.
Step-by-step guide to connecting the water supply hose and dirt trap.
Instructions for properly connecting the machine's drain hose.
Detailed steps for wiring the main power cable.
How to properly ground the machine using the equipotential bonding system.
Wiring diagrams for various machine configurations and power units.
Identifies the connection terminals for external dispenser pumps.
Details on the electrical hookup for external dispenser pumps.
How to configure parameters for external dispenser pumps.
