Servicing and maintenance
55
Terminating the self-cleaning programme:
Press this button.
The background of the button becomes blue.
The machine is filled again.
8.1.3 Cleaning the interior
Caution
Ensure that there are no rusty foreign objects in the machine which can also cause the
"stainless steel rust-free" material to start rusting. Rust particles can come from non-rust-free
dishes, cleaners, damaged wire baskets or non-rust-protected water lines.
The following materials must not be used for cleaning:
High-pressure cleaner
Detergents containing chlorine or acid
Cleaning sponge or wire brush containing metal
Abrasives or abrasive cleaners
Remove dirt with a brush or a cloth.
8.1.4 Cleaning the exterior of the machine
Clean the display with a damp cloth.
Clean the external surfaces using a stainless steel cleaner and stainless steel conditioner.
8.2 Weekly cleaning
Cleaning the spray arms (top and bottom)
Proceed in accordance with Figures C1 to C6.
Cleaning the spray arm bearings (top and bottom)
Proceed in accordance with Figures D1 to D9.
To Next Page
Loading...
