D Select a programme
^
You can select a programme either
by:
–
using the appropriate short cut
button to select one of the four most
frequently used programmes
('favourites'), or
–
by going into the Programme
selection menu.
^
If required, you can then select the
Low temp. option and/or the Timer
from the relevant sub-menu.
The Start button will flash as soon as a
programme can be started.
Payment systems
If your machine has a payment system,
the amount of credit required will
appear in the display.
Credit will be lost if the door is
opened or the programme cancelled
a certain length of time after it has
started.
E Start the programme
^
Press the Start button.
The Start button will light up.
–
Programme running will appear in
the display, followed by Drying and
the programme duration.
–
With sensor drying programmes the
drying level reached, e.g. Machine
iron, Hand iron r, etc. will show in
the display.
Once drying is in progress, you can
press short cut:
– Button
E Timer to call up the
current time of day and the estimated
end time of the programme.
– Button
F Save to save the current
programme as a favourite.
– Button
G Cancel to cancel the
current programme.
How to dry correctly
17
To Next Page
Loading...
