The Settings/Supervisor level is locked with a code to prevent
it being accessed by non-authorised personnel (the
Language J setting can still be altered. See "Supervisor
level".).
Settings Back A
Supervisor level
Access via code
^
Select Access via code and confirm your selection.
To enter the code
Enter the code 000(factory default setting). If you enter the
code wrongly three times, the machine will lock out for an
hour!
0 __
Please enter code
^ Turn the multi-function selector until the first number
appears. Confirm your selection of this number.
^ Repeat the process until all three numbers have been
entered.
After you have entered the last number you need to confirm
the code:
000
Please confirm code
OK
H
Back A
H
^
Confirm the code.
The supervisor level is now open.
Settings/Supervisor level menu
54
To Next Page
Loading...
Need help?
General
