~
This machine must only be connected to the on-site water supply
using a new hose kit. Old hoses must not be re-used. Check the
hose regularly for signs of wear. Change in good time to avoid the
risk of leaks and subsequent damage.
~
Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can the safety
standards of the machine be guaranteed.
~
Do not connect the machine to the mains electricity supply by an
extension lead or a multi-socket unit. These do not guarantee the
required safety of the machine (e.g. danger or overheating).
~
The appliance may only be operated when the following
conditions are met:
– the ship’s hull is longer than 28 metres.
– the list of the vessel is not more than 2°.
– any external vibration is no more than 150 Hz at an amplitude of
0.35 mm.
The safe operation and correct functioning of the appliance can only
be guaranteed if the above conditions are met.
~
The appliance may not be operated on an open deck.
~
Appliances without the "CSA C/US"- safety certificate are built to
comply with european safety regulations.
They must not be used in the USA.
Warning and Safety instructions
9
To Next Page
Loading...
Need help?
General