Need help?Do you have a question about the Miele PW 6207 and is the answer not in the manual?
Explains machine symbols for safety, instructions, and hazards.
Defines appropriate use, warns against flammable substances and improper operation.
Covers earthing, safety features, wiring, and qualified personnel for repairs.
Specific safety advice for gas-heated models, including leak testing.
General usage safety, child safety, hot surfaces, and water discharge.
Covers cleaning agents, accessories, chlorine damage, and disposal of old machines.
Instructions for disposing of packaging materials safely and responsibly.
Advice on maximizing efficiency, load size, spin drying, and detergent use.
Identifies key parts like emergency stop, control panel, dispenser, and drum door.
Details the display, function buttons, rotary selector, and start/stop switches.
Explains specific function buttons and how to use optional chip cards.
Outlines initial setup by a technician and basic machine activation.
Provides maximum laundry weights for different programmes and machine models.
Guides on sorting clothes and properly loading the drum, checking for foreign objects.
Instructions on where and how to add detergent, fabric conditioner, and bleaching agents.
Details how to select programmes, add options like pre-wash, and adjust settings.
Explains how to manually set load weight, wash temperature, and spin speed.
Procedures for safely opening the drum door once the wash cycle is finished.
Information on using specific machine type cards and proper insertion.
How to use supervisor-level card access for specific programmes.
How to change the language displayed on the machine's control panel.
Instructions for scheduling programmes to start at a later time.
How to add starching, skip spin, or stop/cancel programme features.
Details on connecting and using liquid detergent dispenser pumps.
Procedures for calibrating, flushing, and maintaining the liquid dispensing system.
Explains peak load management and PC connectivity via a communication module.
How to view and manage machine operating and programme data.
Describes the automatic weighing system for load detection and residual moisture measurement.
Steps to resolve problems with the door not opening, including emergency release.
How to handle power interruptions and perform an emergency door release.
Explains causes of excessive foaming and how to prevent laundry stretching during spin.
Identifies common error messages and indicates when service is required.
Guides on diagnosing and resolving faults like heating, motor, water, gas, and door lock issues.
Information on contacting Miele service and ordering genuine spare parts.
Instructions for cleaning the exterior, control panel, and plastic components.
Procedures for cleaning the detergent dispenser, compartments, and siphons.
Steps for cleaning water inlet filters and the main filter, especially for gas models.
Guidance on lubricating drum bearings for specific models after reaching a service interval.
Specifies installation by authorized technicians, securing the machine, and ensuring level placement.
Instructions for removing transport fittings before commissioning the machine.
Covers connecting to water supplies, plumbing regulations, and water inlet/drainage requirements.
Guide to connecting liquid and viscous agents to the mixing box.
Procedures for water drainage, electrical connection by qualified personnel, and isolator switch requirements.
Instructions for connecting dispenser pumps, steam supply, and gas connections.
Provides dimensions, weight, drum volume, capacity, voltage, and safety standards.
To Next Page
General
