Installation and planning notes
PW 811 / PW 814 / PW 818 5
Installation requirements
The washing machine must be installed and commissioned by a
Miele Service technician or by an authorised service technician.
The washing machine must be installed in accordance with
applicable regulations and standards. Local energy and water
supplier regulations must also be observed.
This washing machine must only be operated in a room that has
sufficient ventilation and which is frost-free.
This machine should not be installed or operated in any area where
there is a risk of explosion.
Storage/Transport
The following conditions must be observed for transport and storage:
– Ambient temperature: 0-40 °C
– Humidity: non-condensing
General operating conditions
This washing machine is intended only for use in a commercial
environment and must only be operated indoors.
– Ambient temperature of installation location: 0-40 °C
– Relative humidity: non-condensing
– Maximum height above sea level of installation site: 2000 m
Depending on the nature of the installation site, sound emissions and
vibration may occur.
Useful tip: Have the installation site inspected and seek the advice of
a professional in instances where increased noise may cause a
nuisance.
To Next Page
Loading...
Need help?
General
