Attaching the suction hose
^
Insert the hose connector into the
socket until it clicks into position. To
do this, line up the guides on the two
pieces.
To remove the suction hose
from the cleaner
^ Press the release buttons at the side
of the hose connector, and lift the
hose from the socket.
Connecting the handle to the
suction tube
^
Insert the handle into the suction tube
until it clicks into position. To do this,
line up the guides on the two pieces.
^
To release the handle from the
suction tube, press the locking button
(see arrow) and pull the handle away
from the suction tube.
Preparing for use
10
To Next Page
Loading...
