Power cord
,
Unwind the cord completely to
aid the vacuum in dissipating heat.
Unwinding
^
Hold the plug and pull out the power
cord.
,
To reduce the risk of electric
shock, the vacuum has a polarized
plug (one blade is wider than the
other). This plug will fit in a polarized
outlet only one way. If the plug does
not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a
qualified electrician. Do not alter the
plug in any way.
Danger of overheating and damage.
Rewinding
^ Unplug the vacuum from the outlet.
^
Press the rewind switch briefly - the
power cord will rewind automatically.
Hold the plug so that it does not whip
around when rewinding.
Turning the vacuum On and
Off
^
Press the On/Off s switch.
Use
16
To Next Page
Loading...
