...the extension tube can also be used
as a suction wand to extend the reach
of the vacuum, making it easier to clean
under furniture.
Connecting the rug and floor
tool
^ Insert the lower tube of the vacuum
into the floor brush and gently turn
until it locks into place.
^ To remove the rug and floor tool,
press and hold the locking button
and pull the rug and floor tool off of
the vacuum tube.
Winding up the power cord
When the vacuum is not in use, the
power cord can be wound around the
two cable hooks attached to the handle
and extension tube. To prevent the cord
from unwinding, press the cord into the
loocking groove of the plug (see inset).
Assembling the vacuum
13
To Next Page
Loading...
Need help?
General
