There is a non-skid rubber bumper on
the handle of the vacuum.
This allows the vacuum to be leaned
upright against a wall if desired.
Before leaving the vacuum make
sure it is turned off and leaning
against the wall at a safe angle.
To protect the bristle rings on the floor
brush, we suggest hanging the vacuum
on a wall hook by using the hole lo
-
cated on the bottom of the handle.
For longer term storage, the vacuum
can be hung on a wall hook from the
hole located on the bottom of the han-
dle.
Parking and storing the vacuum cleaner
19
To Next Page
Loading...
