Additional notes
...Clean out airways indicator lamp
This indicator lamp comes on to warn
you that the dryer is not working effi
-
ciently.
This may be because:
–
the fluff filter in the door is blocked;
–
the vent ducting or the ventilation
outlet is blocked;
–
the vent ducting is very long
(see "Installation - venting" for notes
on duct length and diameter).
If it is not possible to shorten the vent
ducting, the
Clean out airways
indi-
cator lamp will remind you after each
drying cycle that the fluff filter needs
to be cleaned.
Brief instructions
Recommendation:
To help you become familiar with oper
-
ating the dryer, please make sure that
you also read the detailed instructions
at the beginning of this section.
A Sort the laundry
B Load the dryer and switch it on
^
Press the
Door
button and open the
door.
^
Load the drum and close the door.
^
Switch the dryer on with the
l-On/0-Off
button.
C Select a programme
^
Turn the programme selector to the
required programme.
Additional option(s) can be selected
(point D) if required.
D Select additional option(s)
^
Press the relevant button for the addi
-
tional option(s) required.
E Start the programme
^
Press the START button.
F At the end of the programme
–
the indicator lamp
Anti-crease / Fin
-
ish
lights up and the buzzer sounds.
^
Open the door and remove the laun
-
dry.
^ Switch the dryer off by pressing the
l-On/0-Off
button and close the door.
How to dry correctly
17
To Next Page
Loading...
