Changing a programme
If the programme selector is turned to a
different programme after a programme
has begun, this will not affect the
programme. The
Anti-crease / Finish
in
-
dicator lamp will flash. The indicator
lamp will go out when the selector is re
-
turned to its original position.
After a programme has started, not all
additional options can be switched on
or off (see section "How to dry cor
-
rectly").
Interrupting a programme
^ Switch the machine off with the
I-On /
0-Off
button.
To continue drying:
^ Switch the machine back on with the
I-On / 0-Off
button.
The programme will continue, as long
as the cooling down phase has not
been reached.
To cancel a programme and select a
different programme
^
Turn the programme selector to
Fin
-
ish
.
The programme has been success
-
fully cancelled when only the
Anti-crease/Finish
indicator lamp is
on.
^
Turn the programme selector to the
required programme.
^
Switch additional options on or off as
required.
^
Press the START button.
Adding or removing items
^
Press the
Door
button and open the
door.
,
Do not touch the back of the
drum when adding or removing
items. The drum could be very hot -
danger of burning.
^
Items can now be added or removed
early.
To continue drying:
^
Close the door.
^ Press the START button.
– The programme will continue.
How to dry correctly
18
To Next Page
Loading...
