Memory function
The additional options selected previ
-
ously for specific programmes are
stored in the machine’s memory.
The machine is supplied ex-works with
the memory function switched off. It can
be activated is wished.
Programming and storing in memory
The programmable functions are acti
-
vated with the help of the additional op
-
tion buttons and the programme selec
-
tor.
Before you begin, first ensure that
:
– The tumble dryer is switched off.
– The door is closed.
– The programme selector is at
Finish
.
A Press the
Low temperature
and
Buzzer
buttons at the same time,
keep them pressed in
and ...
B ... switch the dryer on with the
I-On /
0-Off
button.
C Then release these buttons.
–
The
Drying
and
Cool air
sequence
indicator lamps will flash.
D Turn the programme selector to COT
-
TONS
Normal
.
–
If the
Machine iron
sequence indica
-
tor does not light up, the Memory
function is deactivated.
–
If the
Machine iron
sequence indica
-
tor does light up, the Memory func
-
tion is activated.
E Pressing the START button switches
between activating and deactivating
the Memory function.
F Switch the machine off with the
I-On /
0-Off
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
To check:
^ Carry out steps A to D.
If the indicator light for
Machine iron
lights up = the Memory function is
switched on
does not light up = the Memory func
-
tion is switched off
^
Switch the machine off with the
I-On /
0-Off
button.
The check is complete.
Programmable functions
47
To Next Page
Loading...
