Cleaning the fluff filter
The fluff which is created by the dry
-
ing process is collected in the fluff fil
-
ter in the door. Clean the filter after
every drying cycle.
^ Open the door and pull the fluff filter
out of the door as illustrated.
^
Use your fingers to remove the fluff
from the surface of the filter.
^
Remove any fluff from the hollow part
of the door holder.
A cleaning brush is available as an
optional extra from your Miele dealer
or the Miele Spare Parts Department.
You can also use a vacuum cleaner.
^
Once clean, push the filter back into
the door holder until it clicks into po
-
sition. Ensure it is facing the correct
way. Close the door.
If there is a great deal of compacted
fluff on the filter, it can be cleaned
under hot running water.
^
After cleaning shake thoroughly until
no more water droplets are visible.
^ Dry the filter carefully.
^ Push the filter back into the door
holder until it clicks into position.
Make sure it is the right way round.
Cleaning and care
20
To Next Page
Loading...
