Cleaning the fluff filter
The fluff which is created by the drying
process is collected by the fluff filter.
Clean the filter after each drying
programme.
Tip: You can also use a vacuum
cleaner to remove the fluff.
^ Open the door and pull the fluff filter
(1) out of the door as illustrated.
^
Use your fingers to remove the fluff
from the surface of the filter.
^
Remove any fluff from the hollow part
of the door. You could also use a
cleaning brush which is available as
an optional extra from your Miele
dealer or the Miele Spare Parts
Department, or use a vacuum
cleaner.
^
Also clean the door seal (2) with a
damp cloth.
^
Once clean, push the filter back into
the door holder until it clicks into
position. Ensure it is facing the
correct way.
^ The filter can be rinsed under hot
running water if necessary. Dry it
carefully before replacing it.
Programme chart
17
To Next Page
Loading...
