Drying levels
You can alter the drying levels for the
Cottons
and
Minimum
iron
programmes.
The bar chart shows you the setting.
The machine is delivered with a medium setting set as stan
-
dard.
Depending on the setting, the programme duration will be
shorter (Damper) or longer (Drier).
Extending the cooling down time
The cooling down phase which takes place before the end
of a programme can be lengthened if required. This makes
the garments easier to handle.
The bar chart shows you the setting.
The machine is delivered with 0 mins (normal cooling down
period) set as standard.
You can select an extended cooling down time in 2 minute
increments up to a maximum of 18 minutes.
You cannot extend the cooling down time for the Warm air,
Cool air, Woollens handcare or Smoothing programmes.
Settings menu J
54
To Next Page
Loading...
Need help?
General
