What to do if the “Clean out airways” light comes on in Miele T 494 C Dryer?
If the “Clean out airways” light illuminates, it means the fluff filters are blocked or the condenser unit hasn't been cleaned in a while. Turn off the dryer using the 'l-On/0-Off' button. Clean the fluff filters after each use and ensure you regularly clean the condenser unit.
What to do if water leaks from my Miele T 494 C Dryer after cleaning the condenser unit?
If water leaks after cleaning the condenser unit, it means the condenser unit hasn't been correctly locked into place. Ensure that the condenser unit and cover are firmly in position and locked into place again.
Why does my Miele Dryer take so long to dry?
The drying process might be prolonged due to several reasons: insufficient ventilation (open a door or window to increase airflow), a blocked vent below the door (remove any obstructions), the dryer's inability to blow air out correctly (clean the fluff filters and condenser unit), or insufficiently spun laundry (spin laundry at the highest possible speed in the washing machine).
Why is my Miele T 494 C Dryer laundry not sufficiently dry?
If your laundry isn't drying properly, it might be because the load consists of different fabrics. Next time, select a more suitable drying programme.
What to do if my Miele Dryer fails to start?
If the tumble dryer isn't starting, it could be due to an incorrect selection procedure. Repeat the switch-on procedure. Also, check if the machine is plugged in, the door is closed properly, the “I-On/0-Off” button and the “START” button were pushed, and whether a fuse or circuit breaker has tripped.
Why does the “Empty out container” light come on in my Miele T 494 C Dryer?
The “Empty out container” light comes on because the condensed water container is full or not correctly positioned. Empty the container and ensure it is correctly positioned.
What to do if the “Anti-crease/Finish” light flashes on my Miele T 494 C?
If the “Anti-crease/Finish” light is flashing, try switching the machine off and on again, then select the programme and press “START.” Alternatively, cold surrounding temperatures below freezing may be affecting the machine (frozen condensed water), so install the appliance in a warmer room. If the light continues to flash there is a problem. Contact Miele Service Department.
Why are my synthetic items statically charged after using my Miele T 494 C Dryer?
Static charge on synthetic items after drying can be reduced by adding a fabric conditioner during the final rinse in the washing machine.
What does it mean if the “Drying” indicator light flashes on my Miele T 494 C?
If the “Drying” indicator light flashes, it means that the programme selector was moved after the beginning of the programme, but the programme continues to run correctly. Turn the programme selector back to its original position and the light will go out.
How to fix the interior drum lighting on my Miele T 494 C?
If the interior drum lighting isn't working, the bulb may be defective. Change the bulb, refer to the instructions at the end of this section.
Details the function of each button and indicator on the appliance's control panel.
Essential safety advice, proper use, and warnings for operating the appliance.
Ensuring electrical safety, earthing, and authorized repairs.
Covers extension cables, faulty components, specific fabric risks, and door safety.
Tips on efficient drying, including spin speed, load size, and ventilation.
Step-by-step guide to turning on the machine and loading the drum.
Detailed instructions for cleaning the condenser unit.
Resolving issues when the tumble dryer fails to start.
Solutions for static charge and excessive fluff accumulation.
Diagnosing and fixing issues like long drying cycles and water leaks.
Resolving interior drum light issues and opening the door during power outages.
Interpreting and resolving issues indicated by flashing warning lights.
Specific electrical connection advice for the UK market.
General| Appliance type | Tumble dryer |
|---|---|
| Loading type | Front loading |
| Energy efficiency class | C |
| Noise level | 65 dB |
| Number of programs | 12 |
| Delay start | Yes |
| Child lock | Yes |
| Dimensions (H x W x D) | 850 x 595 x 580 mm |
To Next Page
