Electronic system lock
The system lock prevents anyone
from interfering with the dryer.
To activate the system lock
1 Ensure that the door is closed and
that the programme selector is
turned to “Finish”.
2 Turn the machine on.
3 Press the “Short” button and keep it
pressed in while carrying out steps
4 to 6.
4 Slowly turn the programme selector
clockwise stage by stage until it re-
aches the “COTTONS/Normal” positi-
on.
5 Slowly turn the programme selector
anti-clockwise stage by stage until it
reaches the “Finish” position.
6 Slowly turn the programme selector
anti-clockwise stage by stage until it
reaches the “MINIMUM IRON/Hand
iron” position.
The “Locked” indicator light will come
on.
7 Release the “Short” button.
The system lock is now activated.
8 Switch the machine off.
To de-activate the system lock
Repeat steps 1-7 .
The “Locked” indicator light will go out
after step
6.
Electronic system lock
19
To Next Page
Loading...
