Drying levels
You can alter the drying levels for the
Cottons
and
Minimum
iron
programmes.
The bar chart shows you the setting.
Factory default: a medium setting.
Depending on the setting, the programme duration will be
shorter (Damper) or longer (Drier).
Extended cool down
The cooling down phase which takes place before the end
of a programme can be lengthened if required. This makes
the garments easier to handle.
The bar chart shows you the setting.
Factory default: 0 mins (normal cooling down period)
You can select an extended cool down time in 2 minute
increments up to a maximum of 18 minutes.
You cannot extend the cooling down time for the Warm air,
Cool air, Timed drying hygiene, Woollens handcare, Silks
handcare or Smoothing programmes.
Settings menu J
56
To Next Page
