The following settings only appear if Communication
module XKM 2000 has been fitted to the dryer.
Mieleqhome
This communication enabled dryer can transmit
programme data through the power lines to the
Miele|home system. The dryer must be signed on to the
Miele|home system.
Please read the separate operating instructions supplied
with the Miele|home system before you sign on the dryer.
Signing on
Settings Back A
Mieleqhome
Sign on
^ Select
Sign on
and confirm your selection.
The signing on process will begin. If signing on is successful,
the following will appear after a while:
k
Sign on successful
When the dryer is in operation, programme data will be
transmitted from it over the power lines.
Settings menu J
61
To Next Page
Loading...
