You cannot change to another
programme once a programme has
started (this prevents unintentional
alterations).
You will need to cancel the current
programme before you can select a
new one.
Once a programme has started
- cancelling the programme and then
selecting a different programme
^
Press the Start/Stop button.
The items will be cooled down,
depending on the temperature
reached and how long they have
been dried for.
If you press the Start/Stop button
again during the cooling down
phase, Finish will light up in the
display.
^ Press the jk button to switch the
dryer off.
^
Press the jk button to switch the
dryer back on.
^
Select another programme and start
it.
- cancelling the programme and then
removing the laundry
^
Proceed as described below in
"Adding or removing laundry after a
programme has started".
^
Switch the dryer off after closing the
door.
Altering Delay start
^
See "Delay start".
Adding or removing laundry
after a programme has started
^
Press the Door button.
^
Open the door.
^
Add or remove items as required.
^
Close the door.
^
Press the Start/Stop button.
Time remaining
The time left shown in the display may
now vary from the actual drying time.
Changing the programme sequence
24
To Next Page
Loading...
