Problem Possible cause Remedy
There is a build-up of
fluff.
Fluff is principally the result
of friction when garments
are being worn and to
some extent when they are
being washed. Machine
drying hardly causes any
fluff to form and has no
appreciable effect on the
lifetime of the fabric.
Fluff is collected by the fluff
filters and can be easily
removed (see "Cleaning
and Care").
The laundry is not
sufficiently dry.
The load consisted of
different fabrics.
–
Finish drying using the
Warm air programme.
– Select a suitable
programme* next time
you tumble dry.
Water leaks from the
machine after the
condenser unit has
been cleaned.
– The inner cover of the
condenser unit has not
been locked properly
and/or the condenser
unit has not been
positioned correctly.
– There is a build-up of
fluff.
– Ensure that the
condenser unit is
positioned correctly and
lock the inner cover.
– Check the rubber seals.
– Use a cloth to remove
any visible fluff from the
inside of the condenser
unit housing.
The interior drum
lighting is not
switched on.
The lighting switches off
automatically (to save
energy).
Switch the dryer off and
then on again.
The lamp needs changing. You can change the lamp
as described in "Changing
the lamp" at the end of this
section.
* You can alter the drying levels for some programmes: see "Settings menu".
Problem solving guide
24