EasyManuals Logo

Miele T 8903 C User Manual

Miele T 8903 C
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
~
To prevent the risk of fire, the
following textiles or products must not
be dried in this tumble dryer:
Items which have been dry-cleaned
(for example with a chemical
treatment).
Fabrics which contain a large
proportion of rubber, foam rubber or
rubber-like materials. For example,
products made from latex foam
rubber, shower caps, waterproof
textiles, rubberised articles and items
of clothing and pillows with foam
rubber filling.
Fabrics which contain padding or
fillings (e.g. pillows, jackets). If these
were damaged, the filling could get
out with the risk of igniting in the
dryer.
~
In many programmes, the heating
phase is followed by a cooling down
phase to ensure that the items are not
too hot to handle when you remove
them (this also avoids the danger of the
laundry self-igniting). The programme is
not finished until the cooling down
phase is complete.
Ensure that you always wait until the
end of the programme before removing
the laundry.
~
Warning: Do not switch the tumble
dryer off before the end of the drying
programme. If this was done and the
laundry was then removed immediately,
it could give off a great amount of heat.
~
Fabric conditioner and similar
products must be used according to
the instructions on the manufacturer's
packaging.
Warning and Safety instructions
8

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Miele T 8903 C and is the answer not in the manual?

Miele T 8903 C Specifications

General IconGeneral
BrandMiele
ModelT 8903 C
CategoryDryer
LanguageEnglish

Related product manuals