en - TMV 84x and WMV 96x
40
SmartGrid
The SmartGrid setting is only visible
when the WiFi module is fitted and
signed on.
This function can be used for starting
your washing machine or tumble dryer
automatically at a time when your en-
ergy costs are most economical.
Activating SmartGrid gives the Delay
start button a new function. Set
SmartStart with the "Delay start" button.
The washing machine or tumble dryer
will then start within the timeframe that
you have specified when it receives a
signal from your energy supplier.
If it has not received a signal from your
energy supplier by the latest start time
set, the washing machine or tumble
dryer will start automatically.
The SmartGrid function is switched off
by default.
SmartStart
If you have activated the SmartGrid
function in Settings, instead of Finish
at, SmartFinish will appear in the display
when you press the Delay start button.
You can select a time for the pro-
gramme to start at, instead of finish at
via the "Delay start" setting. In this
case SmartStart will light up in the dis-
play.
Setting the timeframe
You can define a period (from 15
minutes to 24 hours) by which the pro-
gramme must be started.
The procedure for setting this is the
same as for setting the time for Delay
start.
Use the + and - sensors to enter the
hour and confirm your entry with the
OK sensor.
The minutes are now highlighted in
white and can be set.
Confirm with the OK sensor.
Touch the Start/Stop button to start
the programme with SmartStart.
The selected programme will start auto-
matically, as soon as the energy pro-
vider has sent the signal, or the latest
calculated start time has been reached.
The procedure for changing or deleting
the SmartStart function is the same as
described for the Delay start function.
To Next Page
Loading...
