Programmable functions
71
Buzzer
The buzzer sounds to indicate the end
of the programme. It can be switched
on or off.
The continuous tone which sounds
when there is a fault is independent of
the buzzer.
Options
= off
= on (default setting)
Airways indicator
Fluff has to be removed after drying. In
the event of an especially heavy build-
up of fluff the programme is cancelled
and and flash.
You can decide the degree of fluff that
triggers this error message.
You will have an idea of how often this
should be done after a few drying pro-
grammes.
Options
= off
does not appear.
= heavy
only appears when there
is a heavy build-up of fluff.
= normal (default setting)
= delicate
appears when there is
only a small build-up of fluff.
Backlight brightness
The brightness of the dimmed sensors
in the control panel can be selected at
seven different levels.
The brightness changes as soon as you
select a different setting.
Options
= darkest level
= Factory default setting
...
= brightest level
To Next Page
Loading...
