Miele TKB 550 WP - Function Overview and Selection

Programmable functions
63
Programming
You can use the programmable
functions to alter the dryer's
electronics to suit your requirements.
Please read the following pages
which describe the various
programmable functions so that you
are aware of the effect selecting the
different options will have on your
dryer.
Programming is carried out in 8 steps
(, ,  ... ) using buttons and
sensors.
I) To access a programmable
function
Before you begin, ensure that:
– The tumble dryer is switched off.
– The door is closed.
 Press the Start/Stop button and keep
it pressed in whilst carrying out steps
-.
 Switch the dryer on.
Wait until the Start/Stop button lights
up constantly ...
 ... and then release the Start/Stop
button.
II) To select a programmable
function
The number of the programmable
function will appear in the display as 
and a number:
e.g. .
 Touch the  sensor to select the
other programmable functions one
by one:
Programmable function
 Cottons programme - drier or
damper
 Minimum iron programme -
drier or damper
 Extended cool down
 Buzzer volume
 Keypad tone
 Code
 Conductivity
 Additional drying levels
 Standby
 Automatic switch-off
 Memory
 Anti-crease
 Confirm your selection of the
programmable function by pressing
the Start/Stop button.