Cleaning and care
49
Cleaning the plinth filter panel
Use a damp cloth t
o remove any fluff.
Make sure that you do not damage
the rubber seal when doing this.
Che
ck whether the cooling fins are
blocked with fluff (as follows).
Checking the heat exchanger
Danger of injury. Do not touch
the cooling fins. You could cut your‐
self.
Look to see if fluff has accumulated.
If there is visible soiling:
Clean using a vacuum cleaner
with a dusting
brush attached. Care‐
fully pass the vacuum cleaner brush
over the heat exchanger cooling fins
without applying any pressure. Oth‐
erwise the cooling fins could be bent
out of shape or become damaged.
C
arefully vacuum up any visible soil‐
ing.
To Next Page
Loading...
Need help?
General
