Problem solving guide
61
Bottom right grille
I
n general, the cooling fins be‐
hind the grille on the bottom right do
not need cleaning. They should only
be cleaned if the drying process is
taking an exceptionally long time due
to a very high level of dust or fluff in
the room in which the dryer is loca‐
ted.
Fi
rst open the plinth filter panel on
the left from underneath.
Inser
t a spoon handle underneath the
grille.
L
ever off the grille at the top (1.).
L
ever off the grille at the bottom (2.).
Open the grill
e out to the right (3.) ...
...
and pull it, together with its 3
hooks, forwards to remove it from the
front of the dryer.
Danger of inj
ury. Do not touch
the cooling fins. You could cut your‐
self.
Use a vacuum cleaner with a
dustin
g brush attached to clean the
cooling fins. Only pass the vacuum
cleaner brush over them lightly, with‐
out applying any pressure.
Take care not to bend the cooling
fins ou
t of shape or to damage them.
C
arefully vacuum up any visible fluff
or dirt.
Inser
t the 3 hooks of the grille into
the appropriate holes in the front of
the dryer.
Replace
the grille by pressing it firmly
at the top and bottom of the left side.
To Next Page
Loading...
Need help?
General
