Installation beneath a counter
If a countertop is placed over the
washer, at least a
1
/
4
" gap must be
left between the top of the machine
and bottom of the countertop;
nothing should be within ½" of any
side of the washing machine.
– When the machine lid needs to be
removed to reduce the height of the
machine, a countertop kit*is
necessary. The cover plate in the
countertop kit replaces the machine
lid and ensures electrical safety.
– A filler frame* is recommended at a
countertop height of 35
7
/
16
"to
35
13
/
16
" (90 - 91 cm).
– Water intake, drain and electrical
connections should be installed near
the machine and be easily
accessible.
An installation manual is supplied with
the countertop kit.
(* available from your Miele dealer or
Miele.)
Washer stand with drawer
A washer stand is available to raise the
machine for convenience. It has a
drawer to store cleaning essentials.
The stand can be purchased as an
optional accessory.
Installation
45
To Next Page
Loading...
