Before using for the first time
24
Select the required connection type
from the display.
1. Connect via WPS
2. Connect via App
Before installing the tumble dryer in
its final location, ensure the signal
strength is sufficient for your WiFi
network.
If the connection is successful, the
following will appear in the display:
Confirm with OK.
Continue with setting up
Confirm with the OK sensor.
See “1. Notes on correct laundry
care”.
You can then select a programme
and load the tumble dryer as
described in “2. Selecting a
programme” and “3. Loading the
tumble dryer”.
The procedure for using for the first
time is completed when a programme
lasting longer than one hour has been
carried out in full.
To Next Page
Loading...
