Miele TWJ 660 WP

Energy saving tips
26
EcoFeedback
You can view information about the
energy consumption of your tumble
dryer with the  sensor.
The following information will appear in
the display:
- An estimate of the energy
consumption before the programme
begins.
- The actual energy consumption
during the programme or at the end
of the programme.
1. Viewing the estimated
consumption
 After selecting a drying programme,
touch the  sensor.
The estimated energy consumption
level will be displayed as a bar chart.
OK



       
The more bars visible (), the higher the
energy consumption.
The estimate will vary depending on the
drying programme, temperature and
any options selected.
 Touch the OK sensor or wait until the
display automatically returns to the
standard display.
2. Viewing the actual consumption
The actual energy consumption can be
viewed during the programme or at the
end of the programme.
 Touch the  sensor.
OK


Energy
< 0.1 kWh
The consumption will alter as the
programme progresses.
It is also possible to view the soiling
level of the filter as a % at the end of
the programme before you open the
door.
 Touch the  sensor to switch to the
Filter display.
0% = lightly soiled, 50% = average
soiling, 100% = heavily soiled.
Increased soiling will cause the
programme duration to increase which
in turn will increase energy
consumption.
If the door is opened or the
appliance has switched off
automatically at the end of the
programme, the data will revert to
the estimated consumption.
Tip: You can view the consumption
data for the last drying programme in
Settings  under Consumption.