Miele TWJ 660 WP

4. Selecting programme settings
33
Selecting an extra option
Anti-crease
Gentle tumble
Buzzer
Freshen up
 Touch a sensor control to select the
desired extra option.
The relevant sensor control will light up
brightly.
Freshen up and Gentle tumble cannot
be combined, see “Extra options” for
other notes.
 Delay start/SmartStart
Delay start
With the delay start function, you can
choose when you want the
programme to start.
This function is active when the
SmartGrid is switched off.
The hours can be set from 00 to 24.
The minutes can be set in 15 minute
increments from 00 to 45.
Setting the delay start time
 Touch the  sensor.
The following will appear in the display:
OK


:00
00
Start in h
 Set the hours with the  sensors.
Confirm with the OK sensor.
The display will change:
OK


4506:Start in h
 Set the minutes with the  sensors.
Confirm with the OK sensor.
Tip: The values will count upwards and
downwards automatically if you keep
your finger on the  or  sensor
control.
Altering Delay start
The selected delay start time can be
changed before the programme start.
 Touch the  sensor.
 Change the specified time and
confirm with the OK sensor.
Cancelling delay start
The selected delay start time can be
cancelled before the programme starts.
 Touch the  sensor.
The selected delay start time will
appear in the display.
 Set a time value of 0:00 h with the
 sensors. Confirm with the OK
sensor.