Miele TWL 780 WP - Selecting a programme; Switching On and Selecting Standard Programmes

3. Selecting a programme
31
Switching on the tumble dryer
The dryer is switched on by selecting a
programme, and switched off by turning
the programme selector to the  posi-
tion.
 Turn the programme selector to a
programme.
When a programme is selected, the
programme name and the maximum
load (weight of dry laundry) possible
for the programme will appear in the
display for a few seconds.
Tip: The condensed water can be re-
cycled when certain programmes are
used.
See “Condensed water container –
Filling the condensed water container”.
To find out when the condensed water
can be used as part of certain pro-
grammes, see the “Programme chart”
and “Extras”.
Selecting a programme
There are 4 possible ways to select a
programme.
1. Selecting standard programmes
 Turn the programme selector to the
required programme.
The selected programme will be shown
in the display. The standard display will
then reappear.
 Now select the programme settings
and extra options.