Miele TWL 780 WP - Cleaning the Plinth Filter

Cleaning and care
60
Cleaning the plinth filter
Clean the plinth filter when the pro-
gramme running time is longer than
usual or if the following message lights
up in the display: Clean the plinth filter.
See 
 To clear the message, confirm with
OK.
Removing the plinth filter
 Press the round, indented area on the
heat exchanger access panel to open
it.
The panel will spring open.
 Pull the plinth filter out by the handle.
The right-hand guide pin comes out
when the plinth filter is removed. The
guide pin prevents the access panel
from closing without the plinth filter.
Cleaning the plinth filter
 Pull the handle out of the plinth filter.
 Clean the plinth filter carefully and
thoroughly under running water.