^
Fit the covers on to the two holes.
Then plug the holes as shown with
the caps.
^
Secure the transit bars to the back of
the washing machine. Make sure that
holes b are fitted over retainers a.
,
The washing machine must not
be moved without the transit bars in
place.
Store the transit bars as shown or
keep them in a safe place for future
use. They must be re-fitted if the
machine is to be moved again
(e.g.when moving house).
Re-fitting the transit bars
Re-fitting is carried out by reversing the
procedure.
Installation and connection
47
To Next Page
Loading...
