Changing the programme sequence
To cancel a programme:
Turn the programme selector to
“Start/Finish”.
To interrupt a programme:
Press the “ON/OFF” buttton.
To continue the programme, turn the
machine back on.
To change an incorrectly selected
programme:
Turn the programme selector switch
to “Start/Finish”.
When only the “On” lamp is lit, a new
programme can be selected.
To change a programme which has
been “locked” using the Child Safety
feature, see the “programmable func-
tions” section.
To omit a programme stage:
A programme stage must first be
reached to be omitted:
Turn the programme selector to
“Start/Finish”
As soon as the PROGRAMME SE-
QUENCE indicator lamp for the stage
you wish starts flashing:
Turn the programme selector switch
to the desired programme.
Changing the programme sequence
11
To Next Page
Loading...
