Installation
*INSTALLATION*
77
Installing under a continuous work-
top
Risk of electric shock due to ex-
posed cables
There is a risk of coming into contact
with live parts while the lid is re-
moved.
Building under kits* must only be in-
stalled/dismantled by a suitably qual-
ified fitter in accordance with the in-
structions supplied.
- A special building under kit* is re-
quired. The cover plate supplied with
the building under kit is used to re-
place the machine lid. It is necessary
to fit the coverplate for electrical
safety reasons.
- Connections for electricity, water and
drainage should be installed in such a
way that they remain accessible
when the machine is in its final posi-
tion.
Fitting instructions are supplied with the
building-under kit.
Washer-dryer stack
The washing machine can be combined
with a Miele tumble dryer in a washer-
dryer stack. The appropriate “WTV”
stacking kit* to match your dryer is re-
quired.
All parts marked* are available from
your Dealer or Miele.
Please note:
a = at least 2cm
b = WTV without drawer: 172cm
WTV with drawer: 181cm
c = 64cm
To Next Page
Loading...
Need help?
General