Miele WCG660 WCS User Manual

Changing the programme sequence
54
Changing a programme (safety
lock)
A programme, temperature, spin speed
or selected options cannot be changed
once the machine has been success-
fully started. This prevents the machine
being operated unintentionally, e.g. by
children.
If the washing machine is switched off
during active programme operation,
the standby function does not switch
the washing machine off completely
after 15minutes. Safety functions
continue to be active because there
may still be water inside the drum.
Interrupting a programme
 Turn the programme selector to the
position.
The washing machine switches off.
 To continue: turn the programme se-
lector to the position of the wash pro-
gramme that was started.
Cancel?
OK




Yes
 Touch the sensor control.
The following will appear in the display:
Cancel?
OK




No
 Confirm with the OKsensor control.
Tip: IfCannot be changed appears in
the display, the programme selector is
in the incorrect position.
Cancelling a programme
You can cancel a wash programme at
any time after it has started.
 Turn the programme selector to the
position.
 Turn the programme selector to the
Cottons programme.
The following will appear in the display:
Cancel?
OK




Yes
 Touch theOK sensor control.
The suds are pumped away. The follow-
ing will appear in the display:
Prog. cancelled
OK





 Wait until the symbol in the display
goes out and the door unlocks.
 Pull open the door.
 Remove the laundry.

Miele WCG660 WCS Specifications

General

Brand	Miele
Model	WCG660 WCS
Category	Washer
Language	English